![]() ![]() C ut the curb to size using a utility knife. ![]() However, this article suggests using a prepared Kerdi Shower Curb, which is much easier and quicker than building a traditional one.įor installing the Kerdi Board SC for the curb, you can use any of the Schluter or an unmodified thinset mortar similar to the one used for the Kerdi-Shower Tray. Place the included Kerdi Collar over the Kerdi Drain, embed it with the trowel’s flat side or a drywall taping knife, and clean away the excess mortar.įor the shower curb, you can build it the traditional way, such as making it out of wood or concrete, before installing the Kerdi Tray.Then, comb additional mortar using the notched side of the trowel. U sing the trowel’s flat side, apply thinset mortar over the bonding flange and within the recessed area of the shower tray surrounding the drain.Make sure that the flange is completely level (see figure 10). ![]() Press the Kerdi Drain firmly into the mortar to ensure the flange is completely bonded.Apply thinset mortar around the entire drain hole up to the subfloor cutout and install the Kerdi Drain bonding flange.In this example, we will discuss how to install the drain after installing the tray. ![]() If there is no access to the plumbing from below, you should install and connect the Kerdi Drain to the waste line before installing the shower tray.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |